Any individual seems to have their own individual theory about plumbing companies.
How to Use a Plumber’s Snake
A plumber’s snake, or drain auger, is a tool that reaches down into pipes to remove clog-causing blockage. Snakes make up the middle ground between common household plungers and the really big guns. If you’re dealing with a clog too stubborn for your plunger, then a snake is your best chance to clear it out yourself.
Snakes are much more powerful drain-clearers than plungers, but they’re also slightly riskier to use. If you use your plumber’s snake improperly, then you might tear up your pipes or even create leaks. To avoid doing that, it’s important to know how your snake works and how to use it correctly. Here’s everything you should know about using a plumber’s snake.
How does a plumber’s snake work?
what is a plumber's snake?A plumber’s snake is a long, flexible metal cable with a small auger or uncoiled spring on one end and a handle on the other. The auger on the snake looks like a drill bit or a corkscrew. Home plumber’s snakes are usually around 50 feet long. The cable coils up when you’re not using it. Most home plumber’s snakes are hand-operated, and probably have a rotatable handle or even a crank.
Plumber’s snakes work by entering the drain directly to physically contact and then clear away the obstruction causing the clog. You manually insert the auger end of the snake into the drain and then begin uncoiling by rotating the handle. As the snake uncoils, the auger moves further through the drain pipe, until it breaks through the obstruction.
How do you use a plumber’s snake?
1. Put on some clothes you don’t mind getting dirty and lay some old towels beneath the pipes you’re working on. Depending on the nature of the clog, your snaking procedure could get messy. This is especially important if you end up removing the p-trap.
2. (Optional) Consider removing the p-trap. The p-trap, or p-bend, is the curving piece of pipe beneath the sink. It connects the sink to the greater drain pipe system in your home. The reason it’s curved is to prevent sewer gases from rising through the sink and into the home. P-traps are often made of PVC pipe, though they can also be metal.
You can manually remove the p-trap, either with your hands or with the help of an adjustable wrench. Once you remove the p-trap, you should thoroughly inspect and clean it out. If you find your obstruction, then you won’t have to snake at all! Even if you don’t find anything, removing the trap could make snaking easier.
3. (Optional) Consider removing the trap arm. A trap arm is the part of the pipe between the p-trap and the actual wall pipe. It holds the p-trap in place and may curve again to reach the wall. Look for a plastic or metal nut connecting the trap arm to the wall. If you can find one, loosen it to remove the trap arm. If you can’t, then it’s possible the arm is glued in place; don’t attempt to remove it in that case. Make sure you clean out the trap arm like you did the p-trap once you remove it.
Removing the trap arm gets you as close to the drain pipe as possible. Look inside the drain pipe to look for any obstructions. If you can see the obstruction, try removing it from where you are. If you can’t, you should use your snake.
4. Manually thread the auger head of the snake into the pipe. Insert the head of the snake into either the drain (if you didn’t remove the trap), or the access point on the wall. If you didn’t remove the trap, consider running cold water while you snake.
Don’t force the auger into the drain too hard, or you could damage the drain entrance or pipe. Be patient and make sure the head and cable aren’t too long for the drain you’re trying to snake.
5. Begin uncoiling the snake using the handle. Keep the handle of the snake as close to the entrance of the pipe as possible. The more slack the auger had has, the less force you’re supplying it.
Rotate the handle at a consistent pace. Don’t try to rush it or rotate too slowly. If you feel pressure at any point while the cable moves through the pipe, you may have encountered the obstruction.
6. Upon reaching the obstruction, move the rotate the head back-and-forth and up-and-down. Try to break up the obstruction as thoroughly as possible. Don’t try to jam the auger into the walls of the pipe, however. If you hear scraping noises, then you should stop snaking and re-adjust.
If you think the auger might be stuck in the obstruction, consider pulling the snake out of the pipe. In some cases, the obstruction may come out with it. Continue snaking until you no longer feel resistance and the snake uncoils to its full length.
7. Pull the snake out and re-assemble the sink components. Check the auger head for remains of the obstruction and clean it off. If you removed the trap arm and p-trap, then you should re-install them at this point.
8. Check the sink. The snake should have successfully removed the obstruction and solved the clogging problem. If you still seem to have a clog, then you could try repeating your snaking process again. Just like plunging, however, snaking too much can harm your pipes or drains. If a thorough snaking really didn’t solve your problem, then you should consider calling in the pros.
Snaking is a surprisingly easy and accessible homeowner project. As long as you understand how to use your snake, you should solve your problem without creating new ones.
Sometimes, however, you may not be able to beat that clog, no matter what you try. Don’t despair! After your snake, the next step is to call Mike Diamond. We’ve got the tools and know how to find and break up any clog, no matter how stubborn.
Once You Need to Upgrade The Hot Water Tank Here is What To Do
Probably the most overlooked gizmos in our homes nowadays is the hot water heater, or hot water tank. We treat it like an afterthought until the winter season kicks in then find ourselves taken by surprise with the shock of chilly water. It is generally on a frosty wintertime morning that you run the shower longer than usual and find out a lack of hot water. This is when you start to panic searching for the nearest heating company to solve the problem.
Water Heater Life Extension Suggestions
Usually, a gas-supplied hot water tank can last an average of twelve years. A substitution tank might be obtained at your nearby hardware store when it's time if that's what you want. The duration of these tanks can be prolonged either with an insulation jacket or by making sure the calcium debris in the tank are kept clean. A wise home owner will follow one or both suggestions to postpone the inevitable installation.
Though it seems logical that old water heaters must be replaced every so often, you may wonder if it is required to get it done before it reaches the end.
Exchanging The Water Heater Saves Money
The major advantage of investing in a new hot water tank is the savings on your home heating bill. A new water heater will, most likely, work better than any older version. However to make the most of those savings, you will find a few points to take a look at, mostly the number drain tile cleaning of people in your home.
An informed heating specialist can help you work out the size and capacity of a new hot water tank according to the number of people in your family. In any case, more individuals means more hot water.
Different Types of Hot Water Tanks
Water heaters fall under two main categories; Natural Gas and Electric. Gas water heaters are frequently costlier to get and the electric ones could be about the same value initially, but for the most part a little less to get. Many of us are still choosing the old style hot water tank as it's what we are most acquainted with, but on demand water heaters are becoming very popular, so you'll like to look at both before you invest.
Regardless whether you prefer a gas-powered or electric water heater, you can choose instantaneous hot water with what is referred to as the on-demand water heater system. Or perhaps for those who want to go green you can still consider solar power water heaters, that greatly lower the unsafe emissions released by other heating appliances. Just bear in mind the installation complexity you'll encounter with a solar heating unit, so be prepared to pay those extra installation costs.
No matter what type you choose for a new water heater, you should take a close look at hiring the services of a heating company for the work. This type of job involves an knowledge of local heating system codes and suitable air flow of fumes for gas models. If you're not educated in the art of installing a new hot water tank then find a local heating contractor who will do the work for you.
I'm certainly very excited about plumbers and I really hope you appreciated the piece. Make sure you pause to promote this blog entry if you enjoyed reading it. Thank you for taking the time to read it.